ST-75 Slim Tilt Plasma/ LCD/ LED mount up to 75", 150 lbs

$129.00
ST-75
In stock
+

Description



Universal Super Slim, Adjustable Tilt PLASMA, LCD, LED mount

Super Slim/ Flush Adjustable Tilt Plasma, LCD, LED TV Wall mount

UniversalMounts universal Tilt St-75 wall mounts will work with most TV screen from 37" to 75". The super Flush Tilt design is easy to install and remove.

All necessary hardware is included for different wall types. Horizontal and vertical position adjustments allow perfect positioning of the screen regardless of the distance of wall studs.

KEY FEATURES:

  • Your screen will be only 1.65" from the wall
  • Adjustable Easy Tilt provides 0° to +12° angle of viewing
  • Fits most 37", 40", 42", 46", 50", 55", 58", 60", 65" Plasma
  • Fits most LCD , LED screens 37", 40", 42", 46", 52", 60", 65", 70", 75"
  • Supports up to 150 lbs
  • Solid heavy-gauge steel construction
  • Wide open Back Plate for all wire installations
  • Easy to install with 31" back plate to support up to 2 studs (most mounts are only 28") and center the screen
  • TV can slide left to right on the 31" back plate, allowing you to center the TV on the wall from 3" to 12"
  • Supports up to 28.5" (730mm H) x 19.5" (500mm V) TV back Hole pattern

Compatibility: This universal wall-mount bracket is designed to fit flat-panel plasma and LCD screens from 37" to 70". The TV can have a maximum weight of 150 pounds.

Does not support older Pioneer 60" or older Panasonic 65" Plasma prior to April 2010

Does not support Vesa 800

Construction: The bracket is constructed of heavy-gauge steel. Uses 2mm steel. Very heavy duty mount.

Security: The rails can be locked in position by 2 screws on the bottom of each rail. Preventing the Tv from accidental move or

for security reasons.

Mounting: The wall plate must be anchored directly to wall studs using the supplied lag bolts. The slots in the wall plate can accommodate a variety of stud spacing, allowing you to easily mount the TV to wall studs that are 16" or 24" on center. Once the wall plate is anchored to the wall studs and the TV rails (with the TV attached) are hooked onto the wall plate, the TV can slide left to right, allowing you to center the TV on the wall. After the TV is secured, it will be held approximately 1.65" from the wall.

TV Hole patterns Supported:

Horizontal 4" to 28.5" 100---730 mm

Vertical 4" to 19.5" 100---500 mm

WHAT'S IN THE PRODUCT'S BOX?

  • 31" wide Back Wall plate
  • 2 Tilt TV rails, 21" long each
  • All necessary Screws for Wood Stud installation
  • Manual